PCMTec Edition Required: One-Car Workshop or Workshop.

If you know the VIN of your vehicle or if you are a workshop and once obtain the VIN from the Customer, It is possible to download an AB(As Built) file to generate a stock file for the vehicle.

These can be downloaded from the Motorcraft website.
https://www.motorcraftservice.com/AsBuilt

Then open PCMTec Editor, and press "Calibration Tooles" -> "Create Stock File/Calibration Merge".
 

Select "Create Stock File From Existing File".

Press "Create Stock File From Existing File".


Press "Load File".

Select the AsBuilt file just downloaded from the website.

Confirm the information shown on the screen. Once confirm all the detail is correct, press "Save".

Now, you will have the stock file generated using the AsBuilt file opened in the Editor.