Supported Transmission Models - Australian
PCMTec Editor Professional or Workshop Edition supports editing the Australian Ford Falcon 6HP26 transmission for ZF transmission tuning parameters. The FGX 6HP21 is not supported. The BTR 4 speed is supported in all editions.
Enthusiast edition can be upgraded for the difference in price to gain access to TCM tuning.
Available Tuning Parameters
The Professional Edition includes tuning parameters for the 6HP transmission that provide control over: - Shift points (up and down) - Power/economy modes
- Line pressure and many more.
Parameter Details
For comprehensive information about available ZF parameters in the Professional Edition, refer to the various forum posts regarding the ZF Transmission. The parameters and template mapping remain consistent with earlier releases. The workshop edition includes even further access to the parameters/
Modifying Existing Tunes
Requirements for Reading Previous Tunes
- The existing tune file must be unlocked
- File must have been created with PCMTec professional or workshop edition
- You can read the file from the PCM and license it with your account
CustomOS File Considerations
If the existing tuned file is a CustomOS file, you may need to purchase additional credits since the Professional Edition includes only 6 credits by default.
Getting Started
- Confirm your transmission is a 6HP26 not a 5R55.
- Verify if existing tune files are unlocked (if applicable)
- Check forum resources for detailed parameter information
- Consider credit requirements for CustomOS files
